Závěsné tříramenné krmítko na PET láhev - Hanging three-armed bird feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Krmítko používá jako zásobník PET láhve se závitem 38mm (tříchodý). ___ The feeder uses a PET bottle with a 38mm thread
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 82
- Makes
- 1
- Views
- 432
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Závěsné krmítko pro volně žijící ptáky. Určení pro černou slunečnici.
Doporučený materiál PET, ale pokud nebude krmítko na přímém slunci, vydrží i PLA několik sezón. Střecha se tiskne snáz z PLA.
Tisk bez podpěr i límce, výška vrstvy a další parametry tisku nejsou kritické.
Vhodné láhve mívají džusy, ledové čaje a mléko (pozor na závit, musí být tříchodý).
---
Hanging bird feeder for small wild birds. Designed for black sunflower.
Recommended material PET, but if the feeder is not in direct sunlight, PLA will last for several seasons. The roof is easier to print from PLA.
Printing without supports and collar, layer height and other printing parameters are not critical.
Suitable bottles used to have juices, iced teas and milk (watch the thread, it must be three pass).