JetKVM Rugged Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a remix of the rugged box for JetKVM
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 160
- Makes
- 3
- Views
- 1,134
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea
I wanted a box to store the JetKVM device, along with the cables you get in the box and maybe a few more (adapter for Micro HDMI, RJ12 cable etc).
Design
In the center there is a place to put the device. The space on the outside is for the cables to allow them to be stored as loops. On the lid there's a risen part which holds the JetKVM in place. Because of the original model geometry, the whole box can't be made thinner feasibly.
Printing
Straightforward, as per the original model. The seal is to be printed in TPU, if so desired. The latch has to be printed twice per box, a different color can give a nice accent.
Assembly
Most people will opt for 6 M3x30 mm screws, which is fine. In my photos you'll see M3x35 mm screws with nyloc nuts, just a personal preference.
Attribution
Many thanks to Whity for his hugely popular box design!