1 / 2
Mini greenhouse using Ikea Morgontidig bell cloche to Forenlig or Drakfrukt flower pot adapter — image 1
1 / 2

Mini greenhouse using Ikea Morgontidig bell cloche to Forenlig or Drakfrukt flower pot adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.76 – €5.82 net (excluding VAT)

For file: Ikea MORGONTIDIG cloche to Drakfrukt flower pot adapter v4_0.3mm_PLA_MK3S_4h18m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €5.29 excluding VAT (range midpoint).

Weight reported by the author
87 g
Print time reported by the author
4.29 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Adapter that lets you stack an Ikea Bell cloche on a flower pot to make a mini greenhouse.

Rating
0 / 5
Likes
4
Downloads
9
Makes
0
Views
153
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors.

Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued. Looking closely at the cloche, it's not completely symmetrical, it's almost an imperceptible oval. I think the manufacturing tolerances were pretty loose to begin with. Since the groove the cloche sits in is wider to accommodate the loose tolerances, you may notice the asymmetry when viewed from above.

This was initially designed for the red ceramic Drakfrukt plant pot. (The Ikea site says 4 ¾" diameter, but it's closer to 5 ¾"). Like the cloches, the tolerances on these pots are sloppy, up to 5mm variance in diameter. Accordingly, the fit will not be tight all the way around.

Surprisingly, this also fits the 4 ¾ Forenlig pot as well. These are manufactured with much better tolerances, and you can add holes on the bottom for drainage. 

I've included the f3d file if you want to adjust for other pot sizes or tolerances. 

UPDATE: After a few uses, you may find mold/mildew growth on the connecter ring. Realistically, this is an over complicated solution to a minor problem. I recommend getting a hanging planter that the cats cant reach and growing your catnip there.

Tags