1 / 3
Dell Optiplex Micro 140mm Fan Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shell for a Dell Optiplex Micro that allows you to add a 140mm fan
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 183
- Makes
- 2
- Views
- 1,188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This was modelled for the Dell Optiplex Micro 3060. It should fit previous or newer models.
Remove the top panel. You can also remove the front face plate and keep it on
You will need a way to power the fan. Dell has its own pin layout, so you will need to either splice a cable or buy a USB to PWM cable.
The connector Dell uses is a micro JTS 4-pin connector.
I found this forum post about splicing a cable. Not sure how accurate it is so do more research before you try it.
Printing
- I didn't need to use a brim but if you have issues turn it on
- Infill is up to you. I used 10%
Optional
- Fan grill by Sp4s12 or anyone else.
Materials
- 4 x Fan screws (8 if you are using a grill)