1 / 3
Mechanical Gangster Tommy Gun Prop — image 1
1 / 3

Mechanical Gangster Tommy Gun Prop

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by the iconic weaponry in the godfather, I modeled and printed one of the prop Tommy guns.

Rating
0 / 5
Likes
14
Makes
0
Views
653
Reviews
0

Updated at source:

Model information

Category
Props
License
Commercial Use

Inspired by the iconic weaponry in the godfather, I modeled and printed one of the prop Tommy guns based on set and movie images.

there are three interactable aspects of the design.
the trigger sits on a pivot and is tensioned by a rubber band allowing for a movable realistic trigger mechanism.

the reload bolt is movable and can be snapped back through a rail and anchor system.

The drum magazine is removable and can be clicked in to allow for fast movement with the prop.

*Note: below is a link to a video that showcases the painting and operation of the mechanical pieces. sadly the assembly footage was corrupted. If this model gets enough support I will post a video showcasing the assembly process as well as some basic weathering.

https://youtu.be/zHSeDONOYXo


The print settings vary from piece to piece. I personally printed the models using PLA however ABS would be recommended for those wanting a toy that can be thrown around and not break.
Despite using Pla I had no issues with the strength of the print but rather had issues with the glue I used to assemble the model.

I would recommend printing smaller pieces at a high resolution and medium infill to ensure strength.
For larger pieces using a lowered resolution and low infill is very effective for high quality and high-speed prints.

*Note: the parts are low tolerances. For printers that cannot meet high tolerances, manual sanding will be needed to make pieces fit together.

Tags