CRP Bakkie - QuikRead go CRP POK cuvette car medical transport holder Aidian
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Point of Care CRP equipement holder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
As the GP's in a local practice were struggling to transport all relevant bits for a POK CRP test when going on house calls (keeping reagent tube upright during the car ride), I designed this cup that fits most car cupholders. They now also enjoy using it around the practice for carrying all the little bits.
Features:
- Fits 2 standard Aidian CRP ‘QuikRead go’ kits
- Fits additional materials like alcohol swabs and plasters.
- Has drainage holes for drying after cleaning (use print materials according to your local cleaning / autoclave guidelines!)
- Modification of model for other POK tests possible.
- Text can be adjusted in the slicer (use .3mf file)
I contacted the company behind this kit, Aidian. They were very friendly and enthusiastic about this and allowed me to publish and share this model, as long as I mention the following:
“I like the idea of the design a great deal, but there are some limitations coming from the reagent caps which must be stored in their original packaging with silica gel cap. The reagent caps contain freeze-dried reagents, and therefore they need to be protected from moisture including environmental humidity. We recommend taking the caps out of the aluminum package just before use and closing the aluminum tube as soonest. If the reagent caps have accumulated too much moisture, this will resort in error E16388 and unfortunately require resampling. I would also be careful on reusing any old aluminum packages as the silica gel cap might have been saturated with moisture over time and thus will expose the reagent caps to additional moisture instead of protecting them from it.
As a solution, I would recommend using red transport caps which are replaced next to the instrument with the reagent caps. This will ensure that the reagent caps do not absorb moisture during storage and/or transport (cuvette with sample and reagent cap should be kept upright like in your design). Within the practice using reagent caps should be fine as long as they are not stored in the cup holder.
As an alternative to your design, we are offering a closeable transport box which fits up to 6 cuvettes with enough room for lancets and transport caps etc.”