Orange Pi 5 MAX (Probably ULTRA Too) Mobile Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this case for an Orange Pi 5 Max, but it will probably fit the Orange Pi 5 Ultra as well. I call this a…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 122
- Makes
- 1
- Views
- 741
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I designed this case for an Orange Pi 5 Max, but it will probably fit the Orange Pi 5 Ultra as well. I call this a mobile case because it has a place to stow the Wi-Fi antenna when packing it up for a trip.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
**Rafts:**
No
Supports:
Yes
**Resolution:**
.2mm
Infill:
100%
**Filament:** Novamaker PETG transparent blue
Notes:
When using supports, choose the "Support on build plate only" option.
Post-Printing =============
Other stuff you will need...
2.5 mm x 5mm screws (4)
40 mm x 10mm 5V Case Fan
To create the adapter for the fan to plug into the Orange Pi 5 Plus board: (see picture)
Female 1.25mm JST 2-pin wire Connector
Male 2.5mm JST 2-pins wire connector
Soldering iron and solder
super small heat shrink tube
Footers for the bottom:
Scotch SP951-NA Bumpers and Door Stops, 1/2" Round, Clear (4)
How I Designed This ===================
About the design process...
I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.
Category: Other