Ultra Ball | Hyperball | Fanart | Pokemon inspired
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed Hyperball/Ultra Ball, 75mm, 9 parts, yellow circle, bow supports for clean prints. Stand available! 🎮🟡⚪
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 221
- Makes
- 2
- Views
- 675
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Standard Digital File License
Check our my MakerWorld for more free models: https://makerworld.com/en/@mishirostudio
Self-designed Ultra Ball for the 3D printer
Dimensions
I have invested a lot of research and time to achieve the most realistic proportions possible. The diameter is 75mm so that it fits well in the hand.
Assembly
The ball consists of a total of 9 individual parts that are glued together. Optionally, the lid can simply be attached so that the ball can be used as a storage box
Additional supports
To ensure that the bow is printed without errors, I recommend printing the bow-shaped supports. These are 0.1 mm away from the actual shell of the ball so that they can be easily removed after printing by bending them. In my test prints, I have found that this produces better results than the conventional supports.
Do you need a stand for the Ultra Ball? Take a look at this file: https://www.printables.com/model/1188646-stand-for-pokeball