1 / 1
Fast Track for DIY RC Excavator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I redesigned the track to print in half the time.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 249
- Makes
- 1
- Views
- 2,068
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are functionally equivalent with Professor Boots original tracks but print in only half the time.
I like to create 3D models that follow these criteria:
- Do not require supports – I hate supports
- Print quickly – optimized for 0.4mm nozzle diameter with 2 exterior wall thickness
- Are easy to access for maintenance – I like to upgrade parts, but I hate to disassemble the entire model just to change out one part
- Are chamfered on the bottom layer – this helps those who don't have a perfectly aligned bed and may still have “elephant foot” artifacts
- Do not waste plastic – many designers make part WAY thicker than are required for structural strength. This just makes the parts bulky and take longer to print.