First Layer Calibration & Bed Level Test – High Visibility Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Live first layer test print – full bed visibility for easy real-time Z-offset and bed leveling calibration.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 97
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Description
This 3D-printed model is designed specifically for live bed leveling and first layer calibration. Its open layout ensures maximum visibility of all corners and edges of the print bed during printing, allowing you to monitor the first layer in real time and make live adjustments to the bed or Z-offset as needed.
Unlike other test prints, this model leaves the center open and spreads across all key areas of the build plate. This makes it ideal for achieving a perfect first layer and identifying uneven spots on the fly—no need to stop the print or run separate tests for each area.
Two versions of the model are included: one with all lines connected, which uses slightly more material but allows you to remove the entire print in one piece from the bed. The second version has unconnected lines, making it faster to print and just as effective for calibration, while covering all key areas of the build plate.
Instruction
- 3D Printing the Model
- Live Adjustment During Print:
As the printer begins the first layer, observe the extrusion in all zones—front, back, left, right, and center. Adjust the Z-offset live to ensure consistent line width and adhesion across the entire bed. - Repeat if Needed:
After one pass, you can reprint to confirm improvements or fine-tune further. You can also measure the thikness of the first level with a caliber
Print instructions
Recommended Print Settings
- Infill: 15 %
- Layer height: 0,20 mm
- Supports: None
Print Time
- approx. 0:25 (hr:min)
Material use
- Together: approx. 2,9 g
Tools
- Caliper (Amazon DE - https://amzn.to/3SkAKVP)
Tested Printer
Tested Filament
- Prusament PETG Prusa Orange
- Prusament PETG Prusa Galaxy Black
- Polymaker PolyTerra PLA Sapphire Blue
- Extrudr - PLA NX2 neon gelb
- AddNorth E-PLA Marble
- etc.
Updates
---
If you have any questions or improvements/suggestions do not hesitate to contact me!
If you like what you see, consider following me to support my work - more to come -
Every product in the links, I bought and tested by myself. As an Amazon Associate I earn from qualifying purchases through my Amazon links. By buying through any of the links above I will earn commission at no extra cost to you.