Ikea ADILS leg riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This jig connects Ikea Adils legs to a square wood plank (41mm), allowing seamless length extension to fit your needs.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Parametric STEP files are included for compatibility with other square wood planks. Print with the round part facing down; 5 perimeters are recommended. The hole in the round section enhances strength by reinforcing perimeters rather than relying on infill.
How to use:
Slide the jig fully onto all four legs. Place the wood plank, keeping the jig mostly on the legs. By slightly sliding it up, you can access the bottom of the feet to ensure everything is flat by turning the knob. When done, lower the jig to the max, and if needed, secure it with M3 screws.