Burning Punisher HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge art, size 150x150 wihout frame.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 89
- Makes
- 2
- Views
- 279
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Model size is 150 x 150 mm
- Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions.
- You may print at higher layer heights below the Min Depth of 0.72mm The Max Depth is 2.1mm and the Actual Depth is 2.1mm
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
Filaments Used:
PLA Elegoo + Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3.6
PLA Elegoo + Red Transmission Distance: 3.7
PLA Elegoo + Yellow Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #13 (1.12mm) swap to Red
At layer #17 (1.44mm) swap to Yellow for the rest.