WaveShare 4.0"E 6-color e-ink Spectra parametric case with kickstand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric case with a kickstand for the WaveShare 4.0"E display.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a parametric case for the WaveShare 4.01"E e-ink Spectra panel.
Do not use any supports as they will clog the kickstand. Printed with default settings (0.2mm layer, 0.4mm nozzle).
The STL fits a raspberry pi zero with angled pin connectors and a modified HAT (remove the 40pin connector, use the 8pin).
You will need M2*4*3.5 heat set inserts for the cover, and M2 screws to screw it in from the back.
Change the parameters and download a perfectly sized case at: https://cases.frameos.net/ - also available in other sizes, including the similar 4.01"F model (pictured on the last image).