Haken, Klebehaken/ Hook, adhesive hook
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.52 – €0.64 net (excluding VAT)
For file: Haken_0.4n_0.2mm_PETG_MK3.5_32m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.58 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 31.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Die unsichtbare Befestigung erfolgt mit Powerstrips Large/ The invisible attachment is made with Powerstrips Large
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 48
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dieser Haken wird mit Powerstrips befestigt. Die Lasche des Powerstrips steht über, sodass der Haken bei Bedarf wieder gelöst werden kann. Der Haken wird an der "Grundplatte.stl" befestigt und verdeckt die Lasche.
"Haken#1.stl" und "Haken#2.stl" werden mit Sekundenkleber verbunden.Die Teile müssen entfettet werden.
Die wesentlichen Abmessungen sind in einem Foto zu sehen.
Translation: DeepL
This hook is attached with Powerstrips. The tab of the Powerstrip protrudes so that the hook can be removed again if necessary. The hook is attached to the “Grundplatte.stl” and covers the tab.
“Haken#1.stl” and “Haken#2.stl” are connected with superglue and the parts must be degreased.
The main dimensions can be seen in a photo.