1 / 8
Gonk droid candy dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed Gonk Droid candy dispenser that releases M&Ms with a press.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 189
- Makes
- 0
- Views
- 502
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This 3D-printed candy dispenser is shaped like a Gonk Droid from Star Wars and dispenses M&Ms when pressed. The original one powers machines; this one powers you—with sugar!
Assembly instructions
- join the “door” and “connector” pieces. The connector should point away from the flat side of the “door”, like in the picture below.
- insert the joined pieces into the “bottom” part with the flat side of the “door” upwards.
Slide the “floor” part into the “bottom” and hook the “connector” into it.
- insert the springs
- fasten the springs with two pieces of filament
- Insert the two “padding”s into the grooves
- Attach the legs to the bottom of the “floor”.
- Snap the “top” part onto the “bottom”, fill the droid with candy and snap the “lid” on.