1 / 5
Omnifixo Case for Modifi3d Pro and solder stuff
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I used @Max Siebenschläfer's desing and changed it to take my Modifi3d Pro, a soldering tip, solder and chipquick flux.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case uses the following materials:
fixpoint solder (45mm diameter, 27mm height)
M4 soldering tip: https://www.amazon.de/dp/B00W7QDUHK
chipquick flux: https://www.amazon.de/dp/B00HKJTJ6U
I made it to fit my Modifi3d Pro Tool and used the idea with the ball bearings from another case to both hold the yellow bases from ominfix in place and also have them act as holding magnets for the base plate/lid.
Following materials are needed:
2x steel balls with 12mm diameter
1x neodymium magnet 10x2mm