1 / 5
Zapfpistole Tankstelle fuel nozzle Petrol station — image 1
1 / 5

Zapfpistole Tankstelle fuel nozzle Petrol station

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zapfpistole für eine Kindertankstelle mit Halterung für eine Wand. Fuel nozzle for a children's gas station with

Rating
0 / 5
Likes
12
Downloads
110
Makes
0
Views
947
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial

Unser Kindergarten möchte eine Tankstelle für die Rutscheautos bauen. Da ich kein passendes Modell für eine Zapfpistole als “Spielzeug” gefunden habe habe ich beschlossen selbst etwas zu bauen. In den Dateien sind neben den '.stl-Dateien auch gcodes für den MK3S+ und die PrusaSlicer-Projektdateien enthalten. Um die Bohrungen habe ich jeweils den Infill erhöht um etwas mehr Stabilität zu erreichen. Der Schlauch wird an beiden Seiten durchbohrt und mit einer Schraube fixiert. Die Halterung kann links oder rechts montiert werden.

Zusätzliches wird folgendes Material benötigt:

2m Gartenschlauch Außendurchmesser ca. 16mm

Wandanschluss: 
1x M4x30, 
1x Mutter M4

Zapfpistole: 
2x M3x8
3x M3x20
2x M3x25
7x Muttern M3
Stift 3x16
Stift 4x16
Zugfeder 20mm

sonstiges:
4x Schrauben für den “Wandanschluss” des Schlauches
2x Schrauben für die Halterung der Zapfpistole selbst

 

Nachbearbeitung:
Damit der Hebel schön leichtgängig ist habe ich die Innenflächen der Halbschalen angeschliffen und mit Silikonspray dünn eingesprüht. Die Schrauben können ggf. leicht gekürzt werden, wenn es stört.

 

=============================================================

Our kindergarten wants to build a gas station for the ride-on cars. Since I couldn't find a suitable model for a fuel nozzle as a "toy", I decided to build something myself. In addition to the '.stl files, the files also contain gcodes for the MK3S+ and the PrusaSlicer project files. I increased the infill around each hole to achieve a little more stability. The hose is drilled through on both sides and fixed with a screw. The bracket can be mounted on the left or right.

The following additional material is required:

2m garden hose outer diameter approx. 16mm

Wall connection: 
1x M4x30, 
1x nut M4

Fuel nozzle: 
2x M3x8
3x M3x20
2x M3x25
7x nuts M3
Pen 3x16
Pen 4x16
Tension spring 20mm

miscellaneous:
4x screws for the “wall connection” of the hose
2x screws for the holder of the fuel nozzle itself

 

Post-processing:
To ensure that the lever moves smoothly, I sanded the inner surfaces of the half shells and sprayed them with a thin layer of silicone spray. The screws can be shortened slightly if it bothers you.

 

Tags