M4MOTH Greg Scope Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scope covers for the M4MOTH Greg. Simple as that.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
It felt odd not having scope covers on the red dot/scope of the M4MOTH Greg, so I went out of my way to make some simple ones.
Two holes on each cover allow you to run 4mm elastic cord between the covers to keep them nice and secure on the blaster.
There are two variants, "cuts" and “nocuts”. The “cuts” version is meant to be printed in flexible filaments such as TPU, so it can flex if needed, but it should work just fine with harder plastics as well. Both versions should have a nice, tight fit around the scope of the Greg.
Just print 2 of your preferred cover, and you should be good to go.
3 walls and at least 15% infill recommended.