1 / 4
Discovery Dish flange for Sky-Watcher AZ-GTi — image 1
1 / 4

Discovery Dish flange for Sky-Watcher AZ-GTi

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapts your Discovery Dish from KrakenRF for the Sky Watcher AZ-GTi positioner.

Rating
0 / 5
Likes
4
Downloads
43
Makes
0
Views
249
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This adapter plate lets you mount your KrakenRF Discovery Dish directly to your Sky-Watcher AZ-GTi  auto tracking mount/tripod.  

Because of the weight/torque  you should print with a very durable media.  I used PA6-CF as it's quite strong and heat resistant.  However, that's likely a little extreme. :) 

Use many walls and a higher then normal infill to keep the strength for the mounting screws.  I sliced with the following settings.

Wall Loops: 10
Top shell: 8
Bottom Shell: 5
Infill: 35%
Rectilinear infill
Infill/Wall Overlap: 25%

Hole sizes allow ¼-20 bolt/nuts to be used or similar metric size (M6 should also fit, may need washers)

The high number of loops was to make sure there was a very solid surface for the force of the screws.  

The mount holes appear weird because they are.   The bracket that came with my discovery dish had holes not perfectly spaced from each other for some reason.  They may all be stamped the same, but I'd do a test print of a few layers and check hole alignment before printing the whole thing.