First Place Trophy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Celebrate your dubs with this classic cup-style trophy
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 53
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
A simple cup-style trophy to use as a winning prize.
- Recommended Material: PLA Silk
- Recommended Colour: Gold
- Supports Required?: Yes, just paint-on supports for the bottom of the handles.
UPDATE 12 JUNE 2025
Added a multicolour 3MF, for use with AMS or similar system, with the trophy scaled up to 200mm tall. There is also a cavity in the base now. You can optionally add a pause at layer 93 (25.96mm) and glue in weights into this cavity. This extra weight makes the model a lot more satisfying as a trophy. I superglued in two metal connector nuts that I had lying around for example. The pause isn't there by default.
There are also a lot of other different print settings in this new print profile to improve print quality and also to minimise print time because of the colour changes now required. Settings for the bigger version:
- Layer height 0.28mm. Height modifier above the base however, so above the base has a layer height of 0.16mm instead.
- 12% Sparse infill density with Adaptive Cubic Pattern.
- Auto tree supports for the bottom of the handles.
- Flush into the objects infill and the brim width of the prime tower is increased.
- Flushing volumes decreased from the defaults. Multiplier changed to 0.45. Although depending on your filaments, this may lead to some bleeding of colour. It was fine for the filaments I used.
- Bottom shell layers for the base increased to 5.
- Speed for the outer wall reduced to 100mm/s for the cup part of the trophy.