Staedtler Pencil Cap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: Cap v1 v4_0.4n_0.2mm_PLA_MK4S_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cap or Cover for the Staedtler 925-25 mechanical pencil
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 1
- Views
- 147
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
The Staedtler 925 is a great mechanical pencil but the permanently protruding lead sleeve makes it difficult to clip in a bag or a pocket.
A couple of minutes in Fusion 360 and 9 minutes printing - problem solved!
Prints fine in PLA. 0.2mm layers, 2 perimeters, 15% gyroid infill. Closed end on bed.