Travel "Penguins Pool Party" Game
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.11 net (excluding VAT)
For file: Latch_0.4n_0.15mm_PLA_MK4S_6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.10 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The "Penguin Pool Party" Puzzle or game in travel format
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 38
- Makes
- 0
- Views
- 452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a travel variant of the “Penguins Pool Party” puzzle.
The format is the same as all the games in my “travel series”.
The object of the game is to place 2-4 “Penguins” on the board and fit the blocks of ice around it. Be aware not all penguin positions are solvable. To help, I have embedded in the lid 9 starting positions from easy (top) to master class (bottom)
This game is small easily transportable and can be played in a car, train or plane while traveling. It operates without batteries!
The lid has been designed in such way that it is easily taken off to use as a tray to hold the unused or not yet used pieces.
I printed the parts with 0.2 mm layer in PLA. The smaller parts (clamp) with 0.15 mm layer. See the 3mf files.
The penguins are printed with two color changes to make the piece more attractive. The design of the penguin is made under “artistic freedom” at least you can print it with simple horizontal filament change.
For durability, it is best to glue the clamp to the lid.
You can use pieces of filament for the hinge. Probably you have to ream the holes with a 1.8 mm drill. Also you have likely to sand the lid hinge part a bit for smooth operation.
When you print this design, please post it.
Game Rules
Choose a set up with 2-4 penguins in the "water”. Then try to fit all ice blocks around the penguins. Be aware not all starting possibilities are solvable. and having only 2 or 3 penguins can be more difficult to solve with all 4 penguins in the “water”. For starters there are 9 startup positions drawn in the lid.