Box for Prusa nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple box for your Prusa nozzles
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Box for Prusa nozzles: (MK4,XL,MK3.9,MK4S,MK3.9S,CORE One)
Its customizable, if you don't wanna prusa logo on lid or you dont have MMU you can remove it, you dont use 0.6 nozzles? But you use HF nozzles or some hardened nozzles, customs as you wish :)
I made it because I had an incident; I lost the plastic box from the manufacturer, and the tube got a little bit bent because I dropped something on the tube. Well, the nozzle cannot be used… It will be stuck in the Nextruder, or the filament will drag on the sides, and the prints will look like stuck filament in the Nextruder. Hope someone will appreciate the idea of keeping the nozzles safe and sorting by diameters.
Tip: If you gonna print the numbers, use 0.25mm nozzle for best detail. (If you gonna use my project 3 extruder have set to 0.25mm!!)