Sci-Fi Robot Sentry Mech
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
Update - 2/7/26
Added WITH_WIRES_Mini_Robot_Print_PLA_White_v1.1 due to a mess up with the previous upload.
Update - 2/21/25
Scaled the eye down slightly so it is an easier fit.
Changed the tolerance of the guns to be looser.
Print Settings
.1mm - .2mm layers
I recommend 3 wall loops
I used PETG for the black pieces so the hinges don't get loose
TPU wires
Post Processing
Inside the leg joint will sag a little from bridging. This makes the joints stiffer, but may need slight clean up.
Some of the holes for the wires might need drilled out a tiny bit. I just used my side cutters to widen them a bit.
Assembly
No Glue Required - Everything has very tight tolerances
Just follow the picture
Make sure you put the leg together right.. I included a cross section. The leg should be able to bend like the pictures
Pliers may be required for some steps. Especially putting the clip in the head and pushing in the eye
If you are still confused on the assembly you can view it in blender
Blender File included
Feel free to use this any way you want.
There are three different scenes in the project.
