ESPixelStick and Falcon F8 Distro PSU Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts ESPixelStick and Falcon F8 Distro to top of Power Supply
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Print face down
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm and 4mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Hardware
ESPixelStick - https://forkineye.com/product/espixelstick-v3/
F8 Distro - https://pixelcontroller.com/store/accessories/46-f8-distro.html
MW LRS 350 - https://www.wiredwatts.com/ps5v350wm or https://www.wiredwatts.com/ps12v350wm
