Floating 3D Pinter Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My version of a floating feet for my 3D printer for noise and vibration reduction.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 1
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This floating feet uses a 16mm glass marble. The size of the marble is quite important since the bowls are designed for a 16mm marble.
The upper two parts can be printed from any sturdy material. I used PLA works fine.
The lower part should be printed from TPU or a similar soft material. I used a 95A TPU hardness.
You want very smooth surfaces in the bowls for quiet operation. Therefore orient the prints with the surfaces that are highlighted in the third picture touching the build plate.
WARNING:
If you use this feet you need to be aware that whenever you use some force on the printer when working on it, it tends to fall off the feet. After all this whole setup is only held together by the weight of the printer.