Modular Nextruder Nozzle Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original model is very nice, but I would like a nozzle tray that can expand to accommodate my growing collection.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 27
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find your nozzle storage becoming cluttered or stored in individual baggies, a dedicated organizer can help keep things tidy. While searching on Printables for a suitable solution, I found several designs that provided inspiration, but none fully met my needs. Most designs are monolithic nozzle trays, meaning that if your collection grows, you need to reprint the entire tray to accommodate more nozzles. To avoid this, I developed a modular nozzle organizer. Designed to expand alongside your collection.
Key Features:
Modular Design: The Nextruder nozzle section is fully modular, allowing you to add or rearrange trays as your collection grows. The dovetails have a snap feature towards the bottom to allow them to slide easily together, then secure firmly when snapped.
Compatibility with V6 Nozzles: A non-modular section is included for V6 nozzles, providing convenient storage for legacy nozzles.
Labels: If you have different nozzles, you can easily modify the labels in PrusaSlicer, by removing the existing text, and adding your custom label.
End Caps: After assembling all modules, end caps secure to both ends, providing a clean and finished appearance.
Community Feedback: Each tray is labeled according to the nozzles I own. If there is interest, I am open to adding additional trays to accommodate a wider range of Nextruder nozzles.
Print Settings:
Material: Prusament PLA Prusa Orange, Sunlu PLA Matte Black, Sunlu PLA White
Supports: None
Orientation: Print upright
Layer Height: 0.25mm (structural; dovetails need fine detail)
Perimeters: 2
Infill Density: 15%
Important Note: The design includes built-in clearance in the dovetail bridged areas to accommodate minor sagging during bridging, ensuring that the modules sit flush when assembled. Printing the model upside down may reveal this extra clearance, but the clearance is intentional and is needed when printed as recommended.