Flexi Skeleton Spider V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A articulated skeleton spider (Version 2) In different sizes S / M / L / XL
- Rating
- 4.985 / 5
- Likes
- 1,604
- Downloads
- 11,068
- Makes
- 67
- Views
- 26,841
- Reviews
- 65
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Standard Digital File License
Tips for printing:
Filament: PLA (only use PLA)
Supports: No!
Layer height: 0.16mm (optimal) (0.2mm also works)
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: No!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
⚠Warning⚠
Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
Do not scale the spider any smaller otherwise the connections will no longer work!
If you apply too much force to the legs they may break because the connections are small!
Please be careful when removing the spider from the print bed!
Colors and filament I used (1 Color):
PLA Matte / Bone White