1 / 9
Flexi-Sentinel (Print-in-Place)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexi-sentinel inspired by the Matrix movies. Print-in-place without brim or supports.
- Rating
- 3 / 5
- Likes
- 165
- Downloads
- 436
- Makes
- 1
- Views
- 2,340
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
Flexi-sentinel inspired by the Matrix movies. The 15 tentacles are fully poseable and the head can rotate freely vs the tentacles.
Print-in-place without brim or supports. I did end up using a glue stick to ensure adhesion.
I was able to successfully print the model using a 0.4mm nozzle and 0.1mm layer height with a slow first layer speed (20 mm/s). If going smaller, you'll likely need a smaller nozzle to ensure the joints don't get bonded together.
After printing, gently work the joints to get them to move.