Skywatcher AZ-GTi Arrow Satellite Antenna mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts an Arrow Antenna to the Skywatcher AZ-GTi telescope tracking mount for amateur radio satellite use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This lets you attach an Arrow Antenna satellite yagi (normally handheld) to the Sky-Watcher AZ-GTi tracking mount used normally with telescopes.
There is a center hole that can accept a ¼-20 or M6 threaded rod to help with strength. I printed this with PA6-CF material which is very strong and heat resistant.
Print settings
Wall Loops: 6
Top Shell: 10
Bottom Shell: 6
30% infill - rectilinear
25% infall/wall overlap.
You probably don't need the threaded rod, and it may even cause some interference with the Yagi elements. The notch at the top is if you have the portable version of the Arrow yagi that comes apart and there's a rivet holding the mounting tube in place.
This was hacked together using tinkercad, so I cannot provide step or other file types unfortunately.