Cork Plant Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.38 – €0.46 net (excluding VAT)
For file: Cutting_Template_10cm_0.4n_0.2mm_PLA_MK4S_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy to print in-place cork plant coasters from cheap embedded IKEA cork coasters in multiple sizes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
This modern plant coaster made out of cork features an embedded cork coaster. It utilizes cheap IKEA cork coasters which are just 2€ for 3. The benefit of cork is its moisture-absorbing capabilities to protect wood right under your planters. However, simple cork coasters aren't elegant-looking. This issue is fixed by this coaster, by using the cork for its capabilities and integrating it into a modern design.
Just select a size for your use case, print the cutting template, resize the cork for your needs, print the coaster, and embed the cork in it.
Features
- Available in 4 different sizes (size references the exposed cork area)
- 10 x 10 x 1.1cm (X x Y x Z)
- 12.5 x 12.5 x 1.1cm (X x Y x Z)
- 15 x 15 x 1.1cm (X x Y x Z)
- 17.5 x 17.5 x 1.1cm (X x Y x Z)
- Embedded cork coaster
- Using cheap IKEA cork coasters
- Cutting templates included
- Files are available in 3mf and stl format
Printing Recommendations
- Layer Height: 0.20mm/0.25mm
- Infill: 100%
- Supports: Not required
- Filament Suggestions: PLA/PETG
- Add pause right before the overhangs start to print
Printing Instructions
First, print the cutting template, and use it to size cut the cork coaster. Since there is wiggle room, you don't need to be super precise but don't cut it smaller than the template.
Print the actual coaster, and set a pause right before the overhang prints (11.5/11.6mm). Insert the cork coaster, and continue printing.
Share Your Prints!
I’d love to see your makes! Share your photos, and let me know your thoughts in the comments. Your feedback inspires future designs.