Coatrack Fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a beautiful fitting to attach a 25mm wooden rod (or a pipe) between two walls. Voilà, your new coat rack.…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 1
- Views
- 182
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
This is a beautiful fitting to attach a 25mm wooden rod (or a pipe) between two walls. Voilà, your new coat rack.
Obviously you'll need two sets of fittings for each end of the rod. Screw the "fitting-screw" to the walls facing each other (measure twice), then insert a rod of appropriate length and fix it with the "fitting-nut".
The magic of 3D-printing allows to design those dynamically shaped ribs that will align perfectly, while the profanity of the application will guarantee that now one will ever notice...
For the remaining two to three amongst you who did not convert to metric jet: a 1 inch rod also works, i've left some clearance.
Print Settings
Rafts:
No
Supports:
No
0.25
Infill:
high
Notes:
I recommend to use high infill for strength if you plan to hang you soaked winter coats. After all there is not much infill volume anyway.
Category: Bathroom