1 / 1
IKEA Ivar wall tie
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The wall ties that come with the Ivar units are too small to reach the wall over skirting boards. So I made these.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 28
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
These are printed in PLA because they're not going to get exposed to the elements and it's plenty strong enough. I added the hex holes punched right through to create more internal walls to add more strength and rigidity.
Printed with 3 perimeters, 0.2mm structural, 15% cubic infill and snug support in the screw holes so they don't suffer any sag.
Since the gap between the Ivar units and the wall will vary I've included a step file so the ties can be tweaked as needed.