Angled CB-radio handset clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A CB-radio handset clip to face the handset display towards the driver (right hand side)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Where I mounted my clip, on the passenger side (right hand side driver) of the centre console, was convenient to grab, but leaves the handset display facing slightly away from the driver. This model turns the handset towards the driver just enough to be able to see the channel and other info, and leaves the passenger with a good enough view also.
We drive on the right, I'm pretty sure you could just mirror it if you drive on the left (and you've mounted your handset over to the right).
Printing
Needs support for the bottom curve, the overhang edge at the back, and the underside of the mounting holes. I printed it the “right way up”. There is a bridge for the "friction grip button" flat tension spring. I've printed mine in PLA and it's done in vehicle okay so far, plan on PETG if it melts.