1 / 1
Ambidextrous Mag release for mosquito m4 conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
based of DannytheNoob's design: https://www.thingiverse.com/thing:5611832 replaces m4_mag_release_arm.stl
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Printed mine with some generic petg at 235C bed 75C
0.12 layer height with snug supports tested mine with 70% infill
print at the orientation the file is or you can test what works for you
still uses the same m3 nut and screw for the m4 conversion, use filament for the lever(might need to drill the hole bigger, could be my printer/slicer settings issue