Shelf Grille - using grid infill
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.43 net (excluding VAT)
For file: Grille_0.4n_0.2mm_PLA_MK4S_12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Grille for a bathroom shelf unit - but more a tip on using infill.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
My wife had bought a chrome corner shelf unit for the bathroom. The chrome rails were quite spaced out so you couldn't place small items on them.
I thought some sort of grille would work but rather than CAD modelling it, I cheated with the slicer. I designed the grille as a solid piece in CAD and then sliced it with no top or bottom layers and used a 10% grid. In a few minutes I had the first grille and a happy wife.
I made the grilles in PLA as they are so easy and quick to make I'll just replace them if they fail. They've been working fine for 6 months so far.
Probably not much use as a model, but hopefully a useful tip if you've not used it before.
Printed in PLA, 10% grid infill, NO horizontal top or bottom layers, 2 perimeters - but if you use the same technique - adjust to suit your application.