Parametric hanging flowerpot on a board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update: now fully parametric hanging planter - set your diameter, height or size of the hanging hook.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
Update:
I created a fully parametric SCAD file from the original model. Now it is possible to set almost any parameters of the flowerpot and have a print STL generated as you need.
It is possible to set:
- inner diameter
- inner height
- wall thickness
- bottom thickness,
- the width of the hanging hook,
- the thickness of the top wall of the hook,
- the offset of the hook from the top edge (negative offset is also possible)
- the length of the hook (the thickness of the board on which the flowerpot should be hanged)
- the height of the hook
- the thickness of the wall of the hook
Two STL examples showing the possibilities of the model are attached.
--
A simple flowerpot for placing on a vertical board which is usually used to separate office work tables.
The thickness of the board is 2cm, the flowerpot itself has an inner diameter of 12cm and an inner height of 11.8cm. It can easily fit a common flowerpot.
I printed it with PETG, 15% gyroid infill and 4 perimeters. I used the default setting for organic supports. Printed on Prusa MINI - 3mf project file is attached.
Here is a link to the tinkerkad for potential modifications: https://www.tinkercad.com/things/kP2l4VQK95f-hanging-planter