Rivet for Peggit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable rivet for use with the Peggit system.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The automotive rivets recommended by Robert Cowan for use with his Peggit system are pretty cheap - but printing just what you need yourself is even cheaper! (Probably.) Each pair of clips is about 1g of filament total.
This rivet works with the standard Peggit clip. There isn't a central pin included, instead you can use the same ¾" 8-32 (or M4 16mm) flat head machine screw that Robert suggests using as a replacement for the rivet pins for ease of relocating holders. (There is some leeway on what screws will work - the ones in the pictures are ⅝" 8-32 round head screws. The rounded head of these screws makes it a little harder to mount the holder on the clip - flat heads are definitely better - but I got it to work.)
These are a remix of clips peugeot 6mm by ByAntoineB (not a typo, he has "By" in his username).
The examples pictured were printed on a Bambu Lab P1S using SUNLU PLA+ Black.