1 / 7
Flexi Steg — image 1
1 / 7

Flexi Steg

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in place articulated stegosaurus

Rating
5 / 5
Likes
21
Downloads
110
Makes
1
Views
323
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

First attempt at a flexible model for my kids.

Since I started 3d printing, I've always been fascinated by flexible models, especially Flexi Rex from DrLex, so I wondered which dinosaur I could try to articulate and ended up with a stegosaurus (and then I discovered Günther, which is already incredible).

Model drawn and made by me.

I loosely based myself on the hinges schematics from Flexi Rex, available on its GitHub page.

Printing

As usual with articulated models, a clean first layer with proper adhesion is a must. There are some small details on the layer that will cause the print to fail if improperly printed (mainly the tail parts).

I printed the cover model in PLA with a 0.4mm nozzle and 0.2mm layer height on a Prusa Mini with input shaper.

I also printed a prototype with a 0.8mm nozzle and 0.3mm layer height, but the hinges don't flex as well.

Parental reminder

Those models are tons of fun for kids, but don't forget that 3d printed models can break easily, producing small easily swallowed parts or sharp edges.

Don't forget to tell them (the kids).

Tags