1 / 6
Zybo Z7 Desk Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tilted base for your Zybo Z7 FPGA
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I printed the base using PLA but PETG will do just as fine. There is no need for supports and the print is very easy. The Zybo just needs to be pressed into the 2 holes. No screw required.
I printed the feet out of TPU. Those are snap-in, you don't need any screw or glue. The feet are slightly bigger than the holes in the plate and you will only need to press them in.
WARNING: The feet will be too large if you don't use a flexible material like TPU. If you use PLA/PETG, the feet will not be usable (unless using a good amount of pressure maybe…).