Framework 16 Air Flow Mesh with Expansion Cards Storage and Present (dGPU ONLY)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€15.31 – €18.71 net (excluding VAT)
For file: Framework Mesh Spacer_V2_SELFTAPPING_WITH_COUNTERBORE_SCREWS_0.4n_0.2mm_PETG_MK4S_15h48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €17.01 excluding VAT (range midpoint).
- Weight reported by the author
- 255 g
- Print time reported by the author
- 15.81 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Optimize your Framework 16 setup with our full-length spacer, ensuring your dGPU runs smoothly and your laptop stays coo
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 0
- Views
- 764
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Framework 16 with dGPU ONLY - It works great. I have been using this printed and so far - it's great!!!
I recommend printing in PETG with at least four perimeters and 0.2mm layer height. It does need some supports. The holes should each be printed standing up with the side.
I printed mine in Carbon Fiber PETG (with 4 vertical perimeters and 0.2mm layer height).
I would love to see your print for your Framework in the comments!