Sand Wagon for Wooden Tracks
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.14 net (excluding VAT)
For file: Wheel_0.15mm_PLA_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A sand wagon for wooden tracks, which is part of a train that includes a locomotive, a passenger car, and freight cars.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 387
- Makes
- 11
- Views
- 1,637
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
Assembly
list of non-printed items for locomotive
2 pcs - metal axis 30mm x 3mm
2 pcs - sphere magnet 8mm
If the top part consists of several parts, assemble them first.
The top and middle parts need to be glued together. For a more precise assembly, prepare a piece of 1.75mm filament. Insert it into the four holes in the corners of the middle part and cut 2mm above the surface. Then glue the middle and top parts together.
Axles
Two axles need to be created. The axle consists of two printed wheels and a metal axis with a length of 30 mm and a diameter of 3 mm. The axle should be glued to the wheels. Care must be taken to ensure that the wheels are mounted perpendicular to the axle.
Chassis
The chassis consists of two printed parts, two axles, and two sphere magnets with a diameter of 8 mm. Assemble of chassis perform upside down, place the axles on the middle part, insert magnets (the magnets must move freely), and secure the bottom part. Plastic parts can be glued together, but it is usually not necessary.
Train
This train set for Wooden Train Track contains:
Extended Set of Wooden Train Track with 50+ Unique Pieces
