1 / 1
Hypercube Evolution Heat Bed Strain Relief (parametric)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable strain relief for heat bed of HyperCube Evolution 3D.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a 3rd generation remix of another user's bed strain relief design. I remodeled it in Fusion 360 from the STL so that I could tweak it.
To use, just print and attach to the 2020 frame beneath your heat bed using 8mm M5 screws and 2020 T-Nuts near your power and thermistor wires, and then attach the cables to the end by running a small (<2.5mm wide) ziptie through the hole around the cables.
Major changes:
- Elongated to match larger heat bed (330mm versus 300mm).
- Cleaned up the fillets.
- Included the Fusion 360 files for further remixing.
Remixed from Hypercube Evolution Heat Bed Strain Relief.