Wall-E with Helping Hands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Door with print in place hinge. Arms with hands to hold wires. Or alternate arms for alligator clips
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to make a fun, yet simple to print (without MMU/AMS) and practical Wall-E model.
So here is my attempt at that! Everything should be able to be printed fairly easily with no supports!
There's a print in place hinge on the front door, if you want a different color for the front door, you can do that in your slicer.
If you want this more just for fun, I'd recommend printing “arms.3mf” - but if you want to use this with some helping hands alligator clips, print “arms with 5mm holes.3mf”
I also included the step file for that version, so you can edit the hole size to whatever you need.
The only things you might want to change is any hole sizes for fit. Due to everyone's printers being tuned and fitting differently, there is no clearance built into the parts (aside from the print in place hinge).
So if you know your printer, scale the parts in your slicer, edit the STEP files (I have the whole assembly in STEP format), or just go for it and sand/drill holes until everything fits!
I look forward to seeing any makes!