Shower Head Rod Trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small collection of trays I designed that clamp onto the 1" / 24.5mm rod for shower head holders.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
I have 3 daughters, and one shower in my house. That means space in the shower is at a premium. 3D printing to the rescue.
This is a small collection of soap trays I designed for my own home shower. They are designed to clamp onto the 1" / 24.5mm rod/ pole that most adjustable shower head holders use.
Print as oriented, no supports needed. I printed mine in ASA, but ABS, PETG and PLA should be fine. These are designed for M3x4 threaded heatset inserts. Each one requires 2 heatset inserts, as well as 2 M3x10mm stainless SHCS. To be fair, I designed these over several years, and some of the trays might be happier with M3x12mm SHCS.
Mine have been mounted and in use for about 3 years, no problems.
I have also included a caddy I designed for my oldest teenage daughter, which is designed to hang from the cloth bar my shower has on the side. If your shower has a 1" horizontal rod for hanging things from, this might work for you. It holds 2 large shampoo/ conditioner bottles, a bottle of body wash, and a bar of soap in it's own tray. It uses 4 M3x4 heat sets, and 4 M3x6mm SHCS in stainless. Print in ASA, ABS or PETG, for the strength. PLA I would worry about cracking under strain.