CubePot II 🪴 🪴
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bit differently - your office desk perfection. The second version of the CubePot enriched with new details.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 64
- Makes
- 2
- Views
- 330
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
🪴 The base is printed from PLA material and the model must be printed with supports. Prusament Galaxy Black looks great!
For better water tightness, the inner part of the flowerpot is an insert made of PETG material with a wall thickness of 2 mm.
📦 Models included in CubePot II.3mf:
- Pot_II_base
- Pot_II_inner
💡 Tip #1: Use the Ironing feature in PrusaSlicer. The upper surfaces on the base will look smoother. See the fuzzy texture on the model - a nice feature in PrusaSlicer.
💡 Tip #2: At first, print the Pot_II_base. Then measure the internal dimension with a caliper and adjust the dimensions of the Pot_II_inner part in PrusaSlicer accordingly.
📐 Default dimensions:
- Pot_base 100 x 100 x 100 mm
- Pot_inner 79.7 x 79.7 x 90 mm
Don't forget to check out the first version of this model: CubePot (first version)
⚠️ IMPORTANT: For inspiration, share your color combinations of the CubePot II 🙂