1 / 3
Spool Centering Cone Spacer for Bambu Lab Filament Spool Switcher & Winder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows 1, 2, or 3kg spools to be used as donors using the 3kg spindle and 3kg frame.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I want to be able to use 1kg, 2kg, and 3kg spools, but only want to use a single frame and spindle. So, I created these spacers to be used with the Centering Cones, the 3kg Donor Frame, and 3kg spindle.
I've included the Fusion 360 .f3d file if you want to make any changes.
Use the same print settings you used for the other spindle parts. I used Damien's recommended settings with HS PLA:
How To Print ? :
- Material : PLA - PETG
- Layer Height : 0.2mm
- Infill : 20%
- Wall Loops : 4
- Bottom Layers : 4
- Top Layers : 4
- Support : No
- Brim : No