Nerissa jailbird cookie mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 70mm by 70mm cookie cutter in the shape of a Jailbird from Nerissa Ravencroft from holoEN
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Credits
Original design by Marie (@nrnmarie) on Twitter
Design
I designed this using Inkscape and FreeCAD. I recreated the front of the jailbird as an svg and imported it to FreeCAD and worked from there.
There is a “detail” variant, with the intention to draw the wings, eyes and beak. The other is only the outline.
Printing
Nozzle: 0.4mm
Wall thickness: 0.42mm
Layer height: Initial layer 0.2mm, 0.16mm or smaller for the rest
Materials and food safety
You should use a printing material safe for food! PLA is often recommended, but always double-check with the manufacturer, or the technical sheet of the material.
Nozzle material is important too! brass nozzle may contain lead, try using a hardened steel nozzle. Steel only nozzles are fine too, but some may contain coatings inside so the filament runs smoothly, always double check!
A small layer height is recommended, as to not get food in between layers. You can also coat the mold with a food-safe epoxy.
Cleaning should be regular! always before and after use. Don't use warm water, as it might deform the PLA.