Rasberry Pi Zero Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi case with additonal connectors added
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
My spin on this great design - added 3 extra cut outs -
1 for camera ribbon cable
1 for a power connector (2Pin)
1 for a filament sensor (4Pin) [3pin could be used with a mod to the model only used 4 pin as thats that i had]
using JST style connectors used-
Header, Vertical, 2 Way - Jst (japan Solderless Terminals) | CPC
Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC
Connector Housing, 2 Way - Jst (japan Solderless Terminals) | CPC
Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC
Crimp Terminal, XH, 28-22AWG - Jst (japan Solderless Terminals) | CPC
and changed the nut holes to fit heat inserts in and widened the screw posts on the lid
and added some extra hight for the connectors to have clearance from the pcb now 30mm M2.5 screws required with 4 M2.5 heat inserts
i added the extra power connector so i can plug in usb ethernet addapter and have it hard wired as the wifis not the best in the location i have it setup
will update this post when fitted with where ive mounted it on my printer