1 / 4
Godot Logo Locking Storage Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a print-in-place storage box shaped like the robot that is the Godot logo.
- Rating
- 4.333 / 5
- Likes
- 57
- Downloads
- 135
- Makes
- 2
- Views
- 543
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a print-in-place storage box shaped like the robot that is the Godot logo with a locking mechanism.
Printing
- 0.2 mm layer height
- good cooling
- print bridges and 100% overhang walls with 50mm/s
After printing, the two halves will likely stick together. Seperate them using a small screwdriver.